Shower Heater, Small Appliance
Panasonic DH-6SM1PW Multi Point Water Heater
Availability:
In stock
- 6.0 kW Multi-Point
- Built-in ELCB
- Electromagnetic Flow Switch
- IP25 Water Splash-proof
₱10,995 ₱11,495
In stock
💳 Installment Options
xInstallment Price | ₱11,495 |
3 months | ₱3,832/mo |
6 months | ₱1,916/mo |
12 months | ₱958/mo |
24 months | ₱479/mo |
Valid Installment Payments
Up to 24 months installment at 0% interest. The installment price will be applied once you've selected credit card installment payment method on checkout. Play Video
Weight | 2 kg |
---|---|
Dimensions | L 11.2 x W 23.3 x H 19.5 (cm) |
KEY FEATURES | |
Stepless Temperature Control | |
Compact Multi Point | |
Operate at Low Water Pressure | |
Water Filter REady | |
Thermal cut-out with Flow Sensor | |
Built-in ELCB | |
Splash Proof | |
Reinforced Polymide | |
Non-Flammable Material Compliance | |
Manual Reset Thermostat | |
Insulated Structure | |
Built-in Circuit Breaker | |
Flow Sensor | |
TECHNICAL SPECIFICATIONS | |
Power Supply | AC 230 V / 60 Hz |
Power Consumption | 6.0 kW |
Temperature Control | 32°C (min) – 50°C (approx.) |
Min. Water Pressure | 0.02 MPa / 0.2 kgf / cm² / 2.9 psi |
Max. Water Pressure | 0.6 MPa / 6.12 kgf / cm² / 87.0 psi |
Min. Usable Flow Rate | 1.8 L / min. |
Ryuji S. –
I bought this and Rheems Prestige here in Anson’s and just like the reviewer below me, I also had problems with the installers. They give vague answers to questions regarding materials needed to prepare prior to installing the unit and they will quote exorbitant prices for the materials that can normally be bought way cheaper outside. I think Anson’s should investigate this “scam”
Upvote if this was helpful (1) Downvote if this was not helpful (0) Flag for removal
Anonymous –
The product is fine and works well. However, the company handling the installation was not. They said it was free installation but if materials will be needed and used, the customer may supply them or repay the installer. The materials were way overpriced and the installer did not even inform us how much the materials will cost before using them nor ask us if we would like to supply them instead. We paid around 1,900 per water heater installed just for the materials.
Upvote if this was helpful (1) Downvote if this was not helpful (0) Flag for removal